Sputtr.com | Alternative Search Engine

192 168 2 1 Admin

Linksys SPA Configuration

http://192.168.2.2/admin/voice/advanced. Router Voice User Login basic | advanced Info SystemSIP Provisioning Regional PSTN LineUser 1 PSTN User Line Enable: yes Streaming Audio Server (SAS) SAS Enable: no SAS DLG Refresh Intvl: 30 SAS Inbound RTP Sink: NAT Settings NAT Mapping Enable: no NAT ...

List of default Router Admin Passwords and Default Router IP ...

Netgear n/a 1234 Netgear Admin 1234 Nokia m1122 m1122 Olitec admin admin Olitec admin adslolitec Pentagram admin password Pentagram n/a pento Pirelli admin mu Pirelli admin microbusiness Pirelli user password Siemens superuser admin Sitecom 192.168.0.254 admin admin Sitecom 192.168.0.1 n/a sitecom SmartSwitch admin n/a SMC 192.168.2.1 n/a n/a SMC ...

CHANGING THE ROUTER

... Go into the router configuration 192.168.1.1 enter password of: admin The following assumes you have already configured the Router to work in your environment and you are using a router that is using 192168.1.1 as the gateway. Further this assumes that the server IP is set to 192.168.1.2 You may ...

Admin List of default Router Password - Default Router IP ...

admin admin Livingston !root n/a MacSense admin admin Medion n/a medion Microsoft Broadband Networking Routers also known as “Base Station” routers 192.168.2.1 admin admin Microsoft Broadband Networking Routers also known as “Base Station” routers n/a admin Mikrotik admin ...

Sample Configurations

... hostname Farscape password passw0rd enable password chr1cht0n asdm image disk0:/asdm.bin boot system disk0:/image.bin mac-address auto admin-context admin 10.1. n.2 Internet customerA Network 2 inside 10.1.2.3 192.168.2.1 Management host 10.2.1.75 inside inside inside Admin Network 2 10.1.1.3 192.168.1.1 customerB Network ...

Wireless-G Broadband Router with 2 Phone Ports

http://192.168.15.1/admin/voice/advanced. Voice Wireless-G Broadband Router with 2 Phone Ports Setup Wireless Security Access Restrictions Applications &Gaming Administration Advanced View (switch to basic view) Info System SIP Provisioning Regional Line 1 Line 2 User 1 User 2 Line Enable ...

Ethernet Power Controller

ETHERNET POWER CONTROLLER ** ***** DEFAULT IP ADDRESS The factory default IP address is 192.168.1.250 DEFAULT ADMINISTRATOR LOGIN User name: admin (lower case) Password: admin To reset the IP address and admin login to factory defaults: • Switch the unit off • Press and hold the ...

FAQ SMCWBR14S-N4

The next example shows how to configure the router to allow FTP access to an FTP server located in the LAN behind the router with the IP address 192.168.2.101. Login to the router web management interface ( http://192.168.2.1 ) with the administrator credentials (default user: admin, default password ...

•Login to the ADSL Router using http: //192.168.1.1 .

•Login to the ADSL Router using http: //192.168.1.1 . •Username and password are 'admin'and 'admin'.

Q: How do I configure the TEW-435/504BRM (b1) to a DSL, PPPoE ...

The default IP address is 192.168.0.1. At the login, enter your username (admin) and password (password). Step 2. On the left hand side of the screen, click on "Wireless" .