Sputtr.com | Alternative Search Engine


Wave Speed, Frequency, & Wavelength Practice Problems

Calculate the wavelength of an "A" note sounding at 440Hz. 3. A low-frequency radio wave has a frequency of 250,000Hz. What is the wavelength of this radio wave?

• 40&60WattModels • SmallSize2.0”x4.0”x1.2 ...

• UniversalACInput90-264VAC • InputFrequency47-63&440Hz • Single&MultipleOutputs • CoverKitsAvailable • MatingConnector&LoomKitsAvailable

The AB121RTH combines a heavy duty 126dB(A) alarm sounder ...

- AS2220 121dB(A) @ 1m Tone 35 Tone 5 Tone 37 1000Hz Continuous - PFEER Toxic Gas 121dB(A) @ 1m Tone 9 Tone 45 Tone 38 2000Hz Continuous 122dB(A) @ 1m Tone 34 Tone 45 Tone 39 800Hz 0.25sec on, 1 sec off Intermittent 120dB(A) @ 1m Tone 23 Tone 17 Tone 40 544Hz (100mS)/440Hz (400mS) - AFNOR NF S 32-001 ...


When the RMS value of the input line to neutral voltage is between 100V and 126V, and the frequency of the input voltage is between 360Hz and 440Hz, the LED of the optical coupler is energized and the transistor conducts, providing low impedance between INPUT PG pin and the FAULT SIGNALS COMMON.

Recorders - April 2010 Price List : no VAT

Recorders - April 2010 Price List : no VAT Handmade Recorders Model and Pitch ex. VAT No VAT ex. VAT No VAT ex. VAT No VAT ex. VAT No VAT Pearwood & Maple Satinwood & Rosewood Tulipwood & Grenadilla Kingwood & Boxwood Sopranino Recorder in F - Octave Flute - including case Stanesby (440Hz) £341.41 £401.15 £381 ...

Air Data Specifications Altitude

... 267mm x 483mm x 305mm (DPS 501) Weight (English Units) 35 lbs 33 lbs 77 lbs (DPS500) 29 lbs (DPS501) Weight (Metric Units) 15.9 Kg 15 Kg 35 kg (DPS500) 13 kg (DPS501) AC Power Requirements 47-400 Hz 115/230 VAC 90 to 132 VAC 47 to 440Hz 180 to 265 VAC 47 to 66Hz auto-selection 200 VA 88 to 260 VAC 47 to 440Hz 500VA DC ...

Computer Music in Undergraduate Digital Signal Processing

On a piano each key defines a note and the frequencies of these notes are determined by their position relative to the 4th octave (middle) A which is set to 440Hz.


J Faraday shielding K AC input, 200 to 252VAC at 50 to 440Hz K2 AC input 105 to 125VAC and 200 to 252VAC at 50 to 440Hz. See diagram for electrical and mechanical information.

CPD - EC Certificate of Conformity

Approved Products Approval No. VTG-32E The following tones are tested and approved for use in fire detection and fire alarm systems: 1 - LF Sweep frequency (800-1000Hz in 0.5sec) 8 - LF Continuous Tone (800Hz) 25 - German DIN tone (Sweep 1200-500Hz @ 1Hz) 27 - French tone AFNOR (554Hz for100ms and 440Hz for ...


Input Power Requirements: 90 to 130 VAC or 130 to 265VAC; 45 to 440Hz.! Minimum Bench Space Required: Height: 5.25in (13,3cm) Width: 14in (35,6cm) Depth: 17in (43,1cm).!