Authors W.L. SCHROEDER is associate dean, College of Engineering, Oregon State University, Cowallis, OR97331; D.N. SWANSTON is principal research geologist, USDA Forest Service, Pacific Northwest Research Station, Forestry Sciences Laboratory, 2770 ShewoodLane, Suite 2A, Juneau, AK 99801.
AJR:181, November 2003 1227 Complications of Rotator Cuff Surgery in Which Bioabsorbable Anchors Are Used OBJECTIVE. This study assessed the utility of MRI in patients with new or persistent pain after surgery with bioabsorbable rotator cuff anchors.
Visit our website www.NelsonStudWelding.com for a list of our standard stock products. Nelson Stud Welding, Inc. PH 1-800-NEL-WELD E-mail: Nelson.sales@NelsonStud.com 7900 West Ridge Road 1-800-635-9353 Elyria, Ohio 44035 1/04 NELSON STUD WELDING SPECIFICATION: D2L Deformed Bar Anchors (DBA ...
1 UNDERSTANDING ADHESIVE ANCHOR INSTALLATION AND INSPECTION Richard E. Wollmershauser, Wollmershauser Consulting, Tulsa, OK Lee Mattis, CEL Consulting, Oakland, CA Introduction Post-installed adhesive anchors have been used successfully to make connections to concrete structures for many years.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.ca.hilti.com I Product Technical Guide 2006 239 Mechanical Anchoring Systems Kwik Bolt 3 Expansion Anchor 4.3.5 1.
Notable improvements in the 2012 IBC include significant changes to the provisions for anchors in concrete by way of reference in Section 1912 to ACI 318-11, Building Code Requirements for Structural Concrete, and a new ACI standard, ACI 355.4-11.
Helical Anchors, Inc. is one of the few helical pier manufacturers with on-site testing laboratories, and by utilizing their inertia weld patents with domestic, high strength steel, Viking Helical Anchors is able to provide superior products with superior results.
ESR-1385 | Most Widely Accepted and Trusted Page 2 of 4 must be equal to that of the anchor. The drilled hole must exceed the depth of anchor embedment by at least one anchor diameter to permit over-driving of anchors and to provide a dust collection area.
287Duckbill SR1 anchors via pre-drilled pilot holes through the walls and slab. Each anchor had a 28mm high yield bar and was installed to a depth of 6m before
Concrete Anchors Designed to Conform to CSA A23.3-04 © 2008 Simpson Strong-Tie Company Inc. F-SAS-ECA08 12/08 exp. 12/09 The latest edition of CSA A23.3-04 “Design of Concrete Structures” has been adopted by most jurisdictions in Canada.