The most common coatings specified are Z275 (galvanized) or AZ150 (Galvalume®). Z275 zinc coatings are normally produced with a minimum spangle suitable for both painted and unpainted applications.
Typical coatings are Z275 and AZ150. these designations signify: for Z275 Z = Zinc and 275= 275 grams minimum of zinc per square metre, the total on both sides. for AZ150 AZ= Aluminium/Zinc and 150 = 150 grams minimum of aluminium/zinc alloy per square metre, the total on both sides.
G300 or G550 as specified, with a minimum coating mass of AZ150 (150g/m 2). To ensure its superior performance BlueScope Steel will not supply ZINCALUME
Lysaght Trimdek ® is available in Zincalume ® Steel AZ150 and Colorbond ® Steel. Specification details for Lysaght Trimdek ® roofing systems: Zincalume ® Steel AZ150 and Colorbond ® Steel Approx 29 mm 380.5 mm Roof Type Fixing Method Post Number Built Up On Site Stitching Screws 65649-00 For information, brochures and ...
By simple ratio analysis, it can be calculated that AZ150 has a 3.5% yield advantage over Z275 zinc coating. AZ150 has approximately a 1.0% yield advantage over Z180 zinc coating.
The aluzinc coating has a designation of AZ150 which is 150 g/m2 (triple spot test) of aluzinc both sides. The prepainted sheets also have an aluzinc substrate with a coaiing designation of AZ150.
steel AZ150 G550 made by BlueScope Steel(Thailand)Limited hh:mm;dd;mmm:yyyy 12 . Clean COLORBOND ® steel . AZ150 G550 made by BlueScope Steel(Thailand)Limited
A comparison across the various test sites shows that :-• ZINCALUME ® AZ150 steel has at least 8 times the life of Z160 galvanised steel • ZINCALUME ® AZ150 steel has at least 4 times the life of Z275 galvanised steel • ZINCALUME ® AZ150 steel has at least 2 times the life of AZ100 Zinc Aluminium ...
0 T (AZ100, AZ150) 1 T (AZ185) Hardness on cross section (Vickers, 5 g) 140 HV 80 HV (post-annealed) Reﬂection of solar heat New 81% Aged 39%
Australian Standard 1397/G550 AZ150. Figure 3 Figure 1 Figure 2 Figure 5 Figure 4 Figure 6 CONTACT 1300 165 165 www.stratco.com.au All brands and logos/images accompanied by ® or ™ are