Sputtr.com | Alternative Search Engine

Downrod

Hampton Bay Lifetime Limited Warranty Lifetime Limited Warranty

of the 7" downrod and slide the hanger ball the hanger pin through the holes in the collar and downrod. Be careful not to jam the pin against the wiring inside the downrod.

www.homedepot.com

Unpack your fan and check the contents. You should have the following items: 1. Mounting Plate (inside Canopy) 2. Downrod and Ball Assembly

Ceiling Fans That Wobble

Being a flat or a vaulted ceiling , the length of the downrod that the fan is hanging from can also change the airflow to the room and the performance of the fan.

Project Name Fixture Type Catalog # HOUSING -

© 2012 LSI INDUSTRIES INC. Project Name Fixture Type Catalog # HOUSING - Round one-piece die-cast aluminum with powder coated galvannealed ballast

Fan Pocket Guide

Downrod for vaulted ceilings. Longer downrods for vaulted ceilings are available at Lowe's. ● Flushmount fans are excellent for installation in rooms with low ceilings.

installation and operation manual for Hunter Ceiling Fans

If you are using a downrod longer than 6 inches, leave the retaining screws in their place and continue the installation process. Notch Switch*Housing* Mounting Plate Red*Retaining* Screws 7 • Activating Perfect Balance TM

Ceiling Fan Installation Instructions

Next, insert clevis pin through yoke and downrod and secure with cotter pin. (see inset) Tighten both yoke set screws to further secure downrod. Safety Tips WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS 1.

CTF56

17-1/2" 8-3/4" 23-3/4" Finish B - Brown S - Silver W - White Fixture CTF56 Accessories 40-KIT - Fan Mounting Bracket CS36 - 5-Wire Cord Set CT912-W - Slope Ceiling Kit CT925 - Fan Support Outlet Box with 40-Kit DR24-(B,S,W) - 24" Down Rod DR36-(B,S,W) - 36" Down Rod FC-6 - 5A Solid State Speed ...

SLOPED CEILING ADAPTER READ AND SAVE THESE INSTRUCTIONS

INSTALLATION NOTE: A longer Broan downrod is required to prevent fan blades from hitting the ceiling. 1. Assemble fan according to instructions provided with ceiling fan, except substitute a longer downrod and the suspension ball and cross pin from this kit.

Kona Bay Ceiling Fans K52

downrod and tighten set screw "C" in hanging ball into downrod. NOTE: Flange cover will not work with supplied 2 1/2 inch downrod. Flange cover is