Sputtr.com | Alternative Search Engine

Filament

Bayard-Alpert Gauge Filaments: Tungsten or Thoria?

Filament Reactions Chemical reactions at the hot filament can occur and usually belong to one of two groups: (1) thermal dissociation of gas or vapor at the hot cathode and further recombination of the resulting fragments with impurities in the gas or on the walls or (2) ...

Filament Replacement for VS Series Leak Detector

DRAFT 3/1/06 FIELD INSTALLATION INSTRUCTIONS vacuum technologies Filament Replacement for VS Series Leak Detector Part Number 699909994 Rev. A February 2006 NOTICE: This document contains references to Varian.

Selected mechanical and physical properties of boron filaments

Filament H (fig. 20(a)) was produced by the vapor deposition of Filament J (fig. 21(a)) This wire is similar The surface of filaments I (a) Boron filament; ...

Continuous Filament Glass Fibre and Human Health

APFE European Glass Fibre Producers Association _____ _____ July 2003 CHARACTERISTICS OF CONTINUOUS FILAMENT GLASS FIBRE Introduction Glass fibre has been commercially manufactured and marketed for more than 60 years.

Premium Braided Fishing Line

Centrally located, Western Filament has the ability to provide more responsive service to customers on both coasts. Our multi-million dollar manufacturing facility includes over 50,000 square feet of integrated industrial technology.

Tube Topics

7 Tube Topics Section 2: Tube Maintenance With the single exception of the temperature necessary to obtain proper filament electron emission, heat is the primary enemy of vacuum tubes. 2.1 Air Cooled Tubes Air cooled power tubes generally do not require maintenance throughout their normal ...

Filament Winding - The String and the Glue

Filament Winding - The String and the Glue By Scott W. Beckwith, Ph.D. Beckwith Technology Group The Process What is filament winding? Filament winding has been compared to "wrapping a whole bunch of string around a spool and then taking the spool out late."

Ok, Let's start with the standard information for the ...

1 Ok, Let's start with the standard information for the filament Type 021N Identification: Relatively large, non-motile filaments (100->1000 µm).

Scotch® High Strength Filament Reinforced Tapes For ...

Scotch ® High Strength Filament Reinforced Tapes For Flowlines, Risers and Umbilicals Tough, dependable, proven technology for containing flexible pipe armoring • Up to 3X stronger than comparable pressure sensitive, filament reinforced tapes • Made with cut and abrasion resistant polyester ...

Determination of Filament Work Function in Vacuum

Determination of Filament Work Function in Vacuum by Paul Lulai John L Vossen Memorial Award Recipient October 2001 Objective : The objective of this experiment is to experimentally determine the work function (φ) of a filament.