Home
About
Share This
Set as HomepageGrinnell Hangers
Grinnell Mechanical Products Design Data Seismic Applications
Page * of 8 APRIL, 2006 G830 Grinnell Mechanical Products Design Data Seismic Applications Technical Services: Tel: (866) 500-4768 / Fax: (401) 781-7317 www ... The use of spring hangers or other methods can be considered to accommodate vibrat ions.
Grinnell Mechanical Products Design Data System Design
Grinnell Mechanical Products Design Data System Design Page * of 6 APRIL, 2006 G820 Technical Services: Tel: (866) 500-4768 / Fax: (401) 781-7317 www ... The use of spring hangers or other methods can be considered to accommodate vibrations.
SECTION 15140 HANGERS AND SUPPORTS
This Section includes labor, materials, skills, and related services necessary to furnish and install pipe and duct hangers, supports, anchors, weather and fire barrier seals as indicated on the Contract Documents. 1.02 ACCEPTABLE MANUFACTURERS A. Pipe Hangers: Grinnell, Elcen, Fee and Mason, Michigan ...
Pipe Hangers&Supports Product Picture Index Cross Reference ...
Pipe Hangers&Supports Product Picture Index Cross Reference from Grinnell Advantage Industrial Solutions, Inc. (832)237-7500 Ph (832)237-7501 Fax www.advantageindustrial.com
Pipe Hangers and Supports
Pipe Hangers and Supports November 2011 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com.
Pipe Hanger Product Cross Reference
Pipe Hanger Product Cross Reference ® NOTE: This reference guide is for the product application only. Products may not be identical in shape and dimensions.
SPECIAL SPECIFICATION SECTION 15060S HANGERS AND SUPPORTS
B7300; Pipe Slids – Grinnell Figure 280, 435, 437, or Pipe Shields Inc. Model B1000 through B1300; or Pipe clamps – Grinnell Figure 216 or 260. 4.02 PIPE HANGERS AND SUPPORTS
PIPE HANGERS CROSS REFERENCE
Catalog Cross Reference Listing Anvil ® (Grinnell ®) B-Line Anvil ® (Grinnell ®) B-Line Anvil ® (Grinnell ®) B-Line The above Cross Reference is for application use only.
Supports and Anchors
Where thermal movement in pipe line occurs, hanger assembly shall support pipe line in all operating conditions. PART 2 PRODUCTS 2.01 MANUFACTURERS A. Hangers, Inserts and Supports: 1. PHD Manufacturers. 2. ITT Grinnell Corporation.
SECTION 15140 HANGERS AND SUPPORTS
Sleeves through floors in exposed and concealed areas shall extend 1/2 inch above finished floor. 2.02 PIPE HANGERS A. Horizontal steel and cast iron piping shall be supported by carbon steel adjustable clevis hangers equal to: Grinnell Fig. 260, or Grinnell Fig. 69, Elcen Fig. 12, Fee and Mason Fig ...
