INCLINOMETER CASING IN VERTICAL APPLICATIONS The type of inclinometer casing and backfill material for vertical installations is selected to conform to the surrounding ground to reflect ground deformations accurately.
NORDIC TRANSDUCER INCLINOMETER TILT SENSORS Dimensions in mm Electrical connection Wire color Name Function Red Vdc Power supply 8-36 Blue GND Ground Yellow Out X X axis output Green Out Y Y axis output Ordering information: NTI-290.VDC Specification subject to change without notice Nordic ...
Geokon, Inc. warrants its products to be free of defects in materials and workmanship, under normal use and service for a period of 13 months from date of purchase.
Geotechnical Instrumentation . Model 6500 Operating Principle . The Model 6500 Inclinometer Casing is used in conjunc tion with all commercially available inclinometer probes to monitor the stability of embankments, slopes, rock cuts, foundation and excavation walls, piles, coffer dams, etc.
Digitilt Inclinometer Probe Manual, 11/2011 1 Introduction Inclinometer System An inclinometer system ...
Microsoft Word - ICM0035O MEMS Digital Inclinometer System Instruction Manual.doc
© Lippincott-Raven Publishers. Volume 21(11), 1 June 1996, pp 1332-1338 Lumbar Range of Motion: Reliability and Validity of the Inclinometer Technique in the Clinical Measurement of Trunk Flexibility [Diagnostic Imaging and Testing] Saur, Petra M. M. MD; Ensink, Franz-Bernhard M. MD; Frese ...
Installation of coaxial cable and inclinometer in Case 1; A, location; B , inclinometer incremental displacement and TDR waveform for one reading been installed to continuously monitor this movement in the vicinity of the multimillion dollar dragline.
Inclinometer Readings and Maintenance General Considerations. Inclinometers are used to measure lateral ground movements in abutments, foundations, embankments, structures, and consolidation induced settlement in embankments and foundations.
Data Reduction and Error Correction 2000/10/30 13 Inclinometer Accuracy The Specification Slope Indicator states that the system accuracy of the inclinometer is ±0.3 inches per 100 ft, when casing is installed within 3 degrees of vertical and when proper reading techniques are used.