Home
About
Share This
Set as HomepagePsk31 Interface
Building an interface for PSK31 and SSTV
Building an interface for PSK31 and SSTV Building an interface for PSK31 and SSTV By Buck Rogers, K4ABT "RING" Not used! Sound Card "LINE OUT" BucK4ABT TIP Shield "RED WIRE" (WHITE Plug) (GREEN PLUG) Sound Card "LINE IN" "RING" Not used!
IVAARC PSK31 "Penny Pincher" Interface Box
IVAARC PSK31 "Penny Pincher" Interface Box Prepared by Barry L. Geipel AD6HR for the Inland Valley Alliance of Amateur Radio Clubs Introduction The IVAARC PSK31 "Penny Pincher" Interface Box is a very low cost, yet very capable interface designed to get hams up and running on PSK31 with minimal ...
PSK31 Interface
PSK31 Interface This interface circuit is a compilation of the information contained in the HELP files found with the distribution of digipan 1.6d with some changes mainly due to available parts from the "junque box" and or improvements due to the simplicity of the above mentioned descriptions.
What is PSK31
Hardware Several things are necessary for you to be able to operate on PSK31. The first, you already have if you're active on HF - your transceiver. If you don't have an HF rig then see the section at the end 'Alternative Rigs'. Next you'll need an interface, something you can build yourself or buy ...
A Handbook for PSK31 Users, complete with dozens of ...
PSK31 A Handbook for PSK31 Users, complete with dozens of transceiver to PC sound card interface diagrams. © 2000 By Buck Rogers K4ABT IT'S A "RAVE:" To speak of it any other way, or in any manner other than; It's a rave , would be understating its presence and impact on the world of hobby ...
PSK31 The Easy Way
(Waterfall indicator) This procedure is covered in great detail in the PSK31 Help files under "setting up the sound card" (6.) 6. On the Air with PSK31 ith the interface connected, and your transceiver connected to a dummy load, select the Tune button to activate the PTT line and send the PSK31 tone to ...
PSK31 Adapter*
PSK31 Adapter Entry #A3145 Page 1 of 15 PSK31 Adapter (An Amateur Radio Sound Card Interface) Entry #A3145 Introduction The invention of the "Sound Card Interface" and its associated PC software has opened the door to RTTY, SSTV, PACTOR, and a host of other communications modes to the modern ...
An Introduction to PSK31
The Push-To-Talk Interface z Most PSK31 software will use the RTS (or DTR) signal of a PC's serial port to control transmit/receive switching. Unfortunately, that signal is RS232-compatible (that is, ±12 volts), and the PTT input of a transceiver expects a TTL signal (0v/5v). z The following circuit (and ...
PSK31 The Easy Way - Part 1
(Waterfall indicator) This procedure is covered in great detail in the PSK31 Help files under "setting up the sound card" (6.) 6. On the Air with PSK31 ith the interface connected, and your transceiver connected to a dummy load, select the Tune button to activate the PTT line and send the PSK31 tone to ...
Sound Card to Transceiver Interface Schematics
The HANDBOOK of HAM RADIO Sound Card to Transceiver Interface Schematics "For use with PSK31, MFSK16, WSJT, SSTV, Hellschreiber, PACKET, and CW application."
