Sputtr.com | Alternative Search Engine


Electrically Conductive Adhesive For Solder Replacement With ...

CE 3103 WLV Electrically Conductive Adhesive For Solder Replacement With Superior Contact Resistance Stability Key Feature Benefit Superior contact resistance on Sn, Sn/Pb and OSP coated Cu Reliable SMD assemblies on all traditional printed circuit board metal finishes Lead-free No lead, lead ...

Advanced Materials RenCast© CW 20 / Ren© HY 49

RenCast © CW20 HY49 Page 2 of 3 7/3/2007 PROPERTIES Resin/Hardener mix: Volume Unit CW 20 HY 49 Appearance Blue Viscosity at 25ºC m Pa s 15,000 Pot life at 25ºC 1000 ml min 110 Max.


PRODUCT DATA SHEET MOC 101H Produced: SHE 06.03.01 Checked and Approved: Dr T Coleman - 26.11.02 Sales Technical Department MOC 101H contains a combination of powerful stripping agents that attack resinous buildup and removes it from moulds.

Sport Floor System

Junckers High Performance Sports Floor System  Conforms to EN 14904 : A4  Ideal for basketball and all other types of events requiring the highest performance and safety  Low finished floor height of 1½" (40 mm)  Durable sleepers with soft shock pads for maximum performance in ...

Hysol EA 9309

Hysol ® EA 9309.2NA Epoxy Paste Adhesive Henkel Corporation Aerospace Group 2850 Willow Pass Road P.O. Box 312 Bay Point, CA 94565 USA 925.458.8000

Technical Information Sheet

Directions for Use: Typical Performance 1.5 Specific Gravity Silver Colour 400,000 Viscosity (mPa.s) * The actual cure time for any application is dependent on the time it takes for the adhesive to reach temperature.


akademiet for de tekniske videnskaber geoteknisk institut the danish geotechnical institute bulletin no. 21 j. brinch hansen comparison of methods for stability analysis

Presisjonsstålrør Tekniske leveringsbetingelser Del 2 ...

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 10305-2 November 2002 ICS 77.140.75 English version Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes Tubes de précision en acier - Conditions techniques de livraison - Partie 2 ...


This documentation applies to the RS-485 / Modbus communications option for the SMVector inverter and should be used in conjunction with the SMVector Operating Instructions (Document SV01) that shipped with the drive.

Tekniske specifikationer NH30

Lind Jensens Maskinfabrik A/S Kroghusvej 7, Højmark DK-6940 Lem St. • Denmark Home page: www.ljm.dk NH30 Generelt: NH 30 er en dobbeltvirkende hydraulikcylinder.