Sputtr.com | Alternative Search Engine


Model 9305 Assembly and Using Manual

2 TubeHead ASSEMBLING THE TubeHead Before beginning assembly, go through the manual. Look at the drawings. Feel the parts. You're naturally eager to plunge right in, but take a few deep breaths first.


... force daircooling (LPX 300LiquidCooled only) Duty Cycle: 100%-liquid or air cooled Effective Focal Spot: 0.060 in. sq. (1.5mm. sq.) Ambient Temp: 100%duty cycle@120°F (49°C) Storage Temp:-30°F (-35°C) to 160°F (71°C) Safety Devices: •Tubehead Pressure Relief Valve •Tubehead Thermal Cut-Out •Tubehead ...

IntraOs 70 X-ray Equipment

IntraOs 70 X-ray Equipment Operator's Manual Blue X Imaging Srl Via Idiomi 1/8-33 20090 Assago ITALY e-mail bluex@bluex. it


USAF Dental Evaluation & Consultation Service Radiation Symbol Return to Equipment Questions Radiology Radiation Caution Signs Detecting Safelight Problems in the Darkroom Exposure Times for NOMAD™ Portable X-Ray System Reprocessing Quick-fixed Radiographs New ADA Guidelines on Dental ...


Tubehead Installing the tubehead: Make sure the tie-band of the arm is tight. Remove the tubehead from the package, lubricate the pin and the bushing with MOLIKOTE (D) graphite-based grease.


The tubehead contains dielectric mineral oil, which is potentially injurious in case of ingestion or contact with skin or mucous membrane. In case of damage, the oil can flow out of the tubehead.

Intraoral X-ray

As important as the reach of the suspension arm is its stability. The all metal suspension arm of the GX-770 allows positioning the tubehead without any bouncing or after movement during the exposure.

LPX SERIES Constant Potential Portable X-Ray Specifications

Specifications Equipment: X-Ray Tubehead - Constant potential, end-grounded anode, air or liquid cooled versions available X-ray Control unit - Digital Microcomputer based Liquid cooling unit Input line Requirements: Automatic adapts to input line voltage 100-130 VAC, 50/60HZ 20 Amperes maximum ...

Installation, Operation

Tubehead rotation Make sure the tubehead rotates smoothly. Should this not be the case remove the tubehead and check and clean the internal parts.

Unit 20: Medical Physics Techniques

1 Edexcel BTEC Level 3 Nationals specification in Applied Science - Issue 1 - January 2010 © Edexcel Limited 2009 Unit 20: Medical Physics Techniques Unit code: F/502/5564 QCF Level 3: BTEC National Credit value: 10 Guided learning hours: 60 Aim and purpose The aim of this unit is to enable ...